Menu
Cart 0

Tight Metal Pro

Amptweaker

  • $ 31900


Since introducing the popular TightMetal™ distortion pedal in 2011, Amptweaker™ has received many requests for a two button version.  Unlike most distortion pedals with boost, the TightMetal Pro includes 2 Boost knobs, one before and one after the distortion.....so it’s easy to boost the gain AND volume, for the perfect solo tone.  There’s also a Midboost button that works with the output Boost knob, to help solos cut through the mix.
We also polled many customers who didn’t like the TightMetal, to find out what tone changes could be offered to reign in those other metal tones.  The result is the Smooth Edge switch which cuts the high end sizzle for a warmer edge, and 2 Fat switches allow either the normal or Boosted tones to have a thicker attack with a bit more compression.  There's also a High Gain switch to select between Vintage sounding metal or heavier modern metal gain.  The added three band EQ allows for much tonal variation, with its Thrash button for more traditional deeper scooped mids.   Our standard noise gate from the original TightMetal is also included, with the hard stopping Chomp setting to help keep the rhythm as tight as possible.....especially when doing very quick riffs with a lot of palm-muted stops. Internal adjustments allow for tweaking the gate.
Amptweaker pedals are known for effects loops, and this one has 3: a universal loop, another active with the boost, and our popular SideTrak loop which activates when the pedal is OFF, to automatically shut off clean effects.

 Another cool SideTrak trick is that if you only plug in the SideTrak Send, and don't plug in the Return, then that Sent dry signal can be sent to another amp.....meaning you could have the TightMetal Pro going through a 412 halfstack while sending the clean tone to a Twin or some other clean amp.  All this ability comes from two simple jacks on the side of the pedal!

Another cool use for the SideTrak is to use it to switch between amps....if the Send is sent to a 'clean' amp, and the Return left unplugged, then the output of the TightMetal will be muted when the pedal is off.  So you can send the output to your favorite half stack rig, while using your favorite clean amp on the SideTrak Send, for a one button A/B system.

FEATURES

  • Dual Lit Boost controls via Boost footswitch
  • 3 Band EQ, w/ Smooth Edge sw. and Thrash sw.
  • 3 effects loops....Universal, Boost with Pre/Post switches, and the SideTrak loop that works when the pedal is OFF!  Patch in clean effects
  • Gain, Tight & Volume Controls
  • High Gain switch for heavier tones, off for more vintage metal tones
  • Noise Gate switch with Chomp™ setting for quick stops, with internal adjustment, tracks gain
  • Added adjustable internal input noise gate for even more gating
  • Mid switch with Thrash setting
  • Mid Boost switch tweaks Boost similar to TightRock™
  • Internal Fat switches for warmer Rhythm and/or Boost tones
  • Can be used as a preamp, or into a clean channel
  • LED lit knobs when using a power supply
  • Battery disconnect switch with red indicator
  • Runs on 9V-18V batteries or supplies–like 'variacing' your amp up and down, or similar to 50W versus 100W tone
  • Current:  18mA with 1 or 2-9V batteries, 22mA with 9V adapter, 24mA with 18V adapter(adapters add knob LEDs....internal switch disconnects 1-9V battery clip
  • DC Adapter jack, standard 2.1mm X 5.5mm, center ground(-)
  • Magnetic Battery access door opens w/o tools
  • Weight: 3 pounds, Dimensions: 5.625"W X 5"D X 2.125"H
  • Handmade in the USA
  • 5 Year Limited Warranty

We Also Recommend